LEESON Parallel Shaft – P240 Series AC Gearmotors

We provide all LEESON Motor, LEESON Electric, LEESON Electric Motor, LEESON Washgard Series and LEESON Speedmaster Series products.

LEESON Parallel Shaft – P240 Series AC Gearmotors

LEESON Parallel Shaft – P240 Series AC Gearmotors

General Specifications:
  • Totally enclosed designs for continuous duty applications
  • Permanent Split capacitor designs
  • Lubrication by semi-fluid grease
  • Output shafts utilize needle bearings for high load capacities
  • Shafts are hardened Steel
  • First stage gearing is helical type followed by spur type gears
Application Notes:
These gearmotors are designed for mounting at any angle, but shaft up with motor below should be avoided to prevent leakage of lubricant into the motor should the motor’s shaft seal fail. Gear-head damage may occur if gearmotor is stalled, especially in the ratios of 60:1 or higher. Overhung load capacities shown are at center of output shaft. Model P240 gearmotors have the same mounting dimensions as Bison’s 224 and 242 gearmotors many Dayton brand gearmotors.
Available Ratings: Totally Enclosed – 115/230 Volt – 1.0 Service Factor

Output RPM F.L. Torque (In.Lbs.) Input HP Ratio to 1 Over-hung Load (Lb.)
8 3445 1/15 216 491
15 250 1/15 114 407
16 391 1/6 103 399
30 135 1/15 52 330
30 295 1/6 58 330
40 219 1/6 43 303
45 92 1/15 35 292
60 157 1/6 29 268
70 61 1/15 23 256
90 103 1/6 19 237
97 43 1/15 16.5 232
139 30 1/15 11.5 208
156 60 1/6 10.6 201

LEESON Parallel Shaft – P240 Series AC Gearmotors Part Numbers:

LEESON M1145029.00
LEESON M1145023.00
LEESON M1145030.00**
LEESON M1145024.00
LEESON M1145031.00**
LEESON M1145032.00**
LEESON M1145025.00
LEESON M1145033.00**
LEESON M1145026.00
LEESON M1145034.00**
LEESON M1145027.00
LEESON M1145028.00
LEESON M1145035.00**

LEESON WASHGUARD
LEESON M1145138.00
LEESON M1145139.00
LEESON M1145140.00
LEESON M1145144.00
LEESON M1145145.00

Downloads:

SubFHP_ACParllelShftP240

Purchase your LEESON Parallel Shaft – P240 Series AC Gearmotors today!