Motovario Drivon DV

DRIVON, designed to be used in different types of applications (especially pumps, fans and conveyor belts) consists of extremely reliable components and is controlled by our software that provides excellent performance with special attention to the system energy efficiency. Its Vectorial Check, besides ensuring a constant motor torque throughout a wide range of frequencies without requiring the use of the servo-ventilation at low rpm, provides fast and precise output according to the application dynamic conditions allowing high torque overload of the motor.

Conceived for extremely different and variable supply conditions, Drivon is available both in single-phase/three-phase version (200 ÷260 V / 47 ÷ 63 Hz) with a motor power between 0.25 and 1.5 kW, and in three-phase version (360 ÷ 480 V / 47 ÷ 63 Hz) with a motor power between 0.25 and 5.5 kW.

The different functions of this software provide a wide range of standard and optional interfaces for a simple and flexible use.

The electronic part, available in 10 power sizes, is located in two different chassis sizes, one for power up to 1.5 kW and the other for power up to 5.5 kW.

230 V Drivon:

  • Single-phase and three-phase power supply: (200÷260) V / (47÷63) Hz
  • Rated power: 0.25; 0.37; 0.55; 0.75; 1.1; 1.5 kW
  • Speed range: 0÷2500 rpm

400V Drivon:

  • Three-phase power supply: (360÷480) V / (47÷63) Hz
  • Rated power: 0.25; 0.37; 0.55; 0.75; 1.1; 1.5; 2.2; 3.0; 4.0; 5.5 kW
  • Speed range: 0÷3000 rpm

General functions:

  • FOC open-loop vectorial control of asynchronous motors
  • Protection class: IP55 (IP56, IP65, IP66 optional)
  • Built-in STO (Safe Torque Off) feature for safe stop according to ISO 13849-1 and IEC 61508 standards
  • On-board potentiometer with Start function featuring programmable threshold
  • Built-in USB interface
  • Integrated CANopen DSP402 and Modbus RTU field Bus
  • Continuous duty at low speed with reduced use of servo-ventilation
  • Torque overload of 200% at transient rpm
  • Motor I2t thermal cut-out
  • PTC and bimetallic thermal probe input
  • Multi-colour status LED for quick diagnosis
  • Programmable multifunction opto-isolated digital inputs
  • Maximum drive torque can be set by the user
  • Possible speed setting by means of the encoder on motor
  • Enable auto search for idling motor speed at starting
  • Combinatorial multiple frequency reference
  • Dynamic braking with emergency fast stop
  • External process PI regulator with analogue feedback
  • S-ramps with programmable parameters
  • Mechanical resonance frequency controlled management
  • Control and programming smart keypad (optional)
  • Potentiometer + movement direction control module (optional)
  • Profibus DP communication module (optional)
  • Electro-mechanic braking module (optional)
  • I/O expansion module (optional)
  • Dynamic braking module with integrated resistor (optional)

SMART KEYPAD (optional):

  • Integrated in the inverter or remote-type
  • Mechanical fixing with possibility to set its orientation
  • Remote control by means of a cable and RJ connection
  • Parameter setting and Control functions
  • 7-segment 4-digit display
  • UP/DOWN/ENTER/MODE/FWD_REV buttons
  • Parameter Copy function
  • JOG function